No. 1, Tech 9'uncu Yol, Yüksek ve Yeni Teknoloji Geliştirme Bölgesi, Songshan Gölü, Dongguan Şehri, Guangdong Eyaleti
Ana sayfa ÜrünlerYanıcılık Test Cihazları

ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part

Sertifika
Çin Dongguan Hust Tony Instruments Co.,Ltd. Sertifikalar
Çin Dongguan Hust Tony Instruments Co.,Ltd. Sertifikalar
HTI is a reliable supplier of furniture testing machine,I have known her and buy from the factory since 2009.

—— David Hale

We receive the machine and it is so good ,my boss want to import other models again.

—— Kimpoh

I really would like to work with HTI, their professional service on the testing machine and reliable products help me win much market!

—— Ricardo

Bu tedarikçiyi hepinize tavsiye ediyoruz, Güvenilir ve profesyonel alet üreticisi

—— Rodolfo Castello

Laboratuar çözümlerinde profesyonel hizmetlerini gerçekten takdir edin ve güvenilir ürünler çok pazar kazanmama yardımcı olun!

—— Romeu

Ben sohbet şimdi

ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part

ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part
ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part

Büyük resim :  ISO 8142 Flammability Testing Equipment Thermal Insulation Materials PLC Module Control Part

Ürün ayrıntıları:
Place of Origin: Guangdong,China(Mainland)
Marka adı: HTI
Sertifika: ISO 8142:1990 GB/T17430-1998, ASTM C411-82, ASTM C447-85
Model Number: HTB-029
Ödeme & teslimat koşulları:
Minimum Order Quantity: 1 set
Fiyat: Negotiation
Packaging Details: strong plywood box package
Delivery Time: 10 working days
Payment Terms: T/T, L/C, Western Union
Supply Ability: 5 sets per month
Detaylı ürün tanımı
Power: Electronic Product Name: Flammability Testing Equipment
Temperature Range: 0-1250 ℃ Control part: PLC module
Temperature error: ± 0.5 ℃ Timing error: 1s / h
Thermocouple response time: <0.5s Heating rate: 5 ℃ / min or 3 ℃ / min can be set
Vurgulamak:

flammability test

,

Yanıcılık Test Cihazları

 

ISO 8142 Thermal Insulation Materials Maximum Service Temperature Testing Equipment

 

 

Description:

 

It can be used for determining the performance of loosely packed insulation, blanket, blanket, block, plate and prefabrication insulating tube shell and other insulation products at the maximum service temperature.

 

 

Standards:

 

ISO 8142:1990 Thermal insulation---Bonded preformed man-made mineral fibre pipe sections--Specification Annex A

GB/T17430-1998, ASTM C411-82, ASTM C447-85

 

 

Specifications:

 

1. Heating plate: be made of 304 stainless steel, test area 900*450mm, surrounded by protective layer, width 80mm. On the lower surface of the hot plate, not less than five thermocouples were used for measured surface temperatures, four of them were fixed to the diagonal of the heating zone of the heating plate and 150 mm from each corner, and the fifth thermocouple was placed on the center position of heating plate. The temperature measured at any point shall not be less than the required temperature and shall be + 5% or + 15 °C (take the small as standard).

2. Heating tube: be made of SUS304 stainless steel, the length of 2M, nominal diameter of 88mm, 108mm, 133mm three types. The three heating tubes are arranged side by side, and the prefabricated insulated shell can be tested separately. The end of the heating tube should be set not less than 75mm long protection section and auxiliary heater to prevent excessive heat loss of the specimen end. The heating tube was fitted with a thermocouple every 0.3 m to measure the surface temperature. The thermocouples are arranged helically around the heating tube at 90°intervals. The temperature measured at any point shall not be less than the required temperature and shall be + 5% or + 15°C (take the small as standard).

3. Temperature measurement system: the diameter of the thermocouple wire is 5.0mm, the range of measurement temperature: 0-1250 ℃; using PLC + module acquisition temperature.

4. Control part: PLC module, computer control real-time display hot surface temperature curve, output test report.

5. Heating rate: 5 ℃ / min or 3 ℃ / min can be set.

6. Temperature acquisition: collected once every 2min, together with curve shows.

7. Thermocouple response time: <0.5s.

8. Temperature error: ± 0.5 ℃.

9. Timing error: 1s / h.

10. Computer: 1 set (at least meet with these following requirements: CPU: INTEL I5-III on behalf of the above; Memory: 4G or more; Hard disk: 500G or more; with the serial port: control equipment operation; Display: 20 inches or more LED Liquid crystal display, 1600 * 900 resolution above; windows xp system.), A printer. Test software set.

11. Equipped with flat feet and feeler: measure warpage.

12. Equipped with two sample cans.

 

İletişim bilgileri
Dongguan Hust Tony Instruments Co.,Ltd.

İlgili kişi: linmei

Tel: 86-13421721188

Sorgunuzu doğrudan bize gönderin (0 / 3000)